Day 263) Nail art hedgehog

Today I have an incomplete tutorial because some of my (really many) pictures failed.
Still, I believe that you lovelies will be able to follow it anyways...so, here it is!

Step 1:
Make your own nail foil/decal (I've explained this before but will do it again)

Material:
- Plastic zipper bag (or something simular)
- Topcoat (Seche Vite)
- Brown nail polish (Rimmel 550 Major Brown)

Apply a layer of topcoat on the zipper bag and let it dry for a bit.

Apply brown polish on top of the layer of topcoat.
Let it dry completely as you proceed with the next steps.






Step 2:
Apply a light polish as base on the nail(s) (white, beige, nude, pink, peach...you get the idea).

Step 3:
Use a nail art brush and black polish to make the body of the hedgehog. Make the snout red.
Okay this is a step which is pretty important and the pictures were just all blurred.
Luckily the final picture shows the design as well, so I didn't bother to do it again. But if you've read this post and still wish to have a picture of just the body...let me know and I will!

Step 4:
Use your DIY nail foil/decal to make the spines.








Material:
- Scissors
- DIY nail foil/decal (from step 1)







Get the decal from the zipper bag (I use my nails but you can also use tweezers).
Cut it into tiny strips:

Step 5:
Apply a layer of topcoat on the nail. Use this as glue for the strips (spines). Start with the top row, moving down in rows towards the body. Apply some topcoat again between the rows.
N.B. I used a rhinestone picker for picking up the strips but you can also use a wet pencil or wet cotton swab.
Outcome is best when you don't apply the strips flat but let them stick up a little.

I hope my explanation is clearly enough. If not, please don't hesitate to contact me.

 GOOD LUCK!

Day 225) Nail art abstract blue

For today I have another step-by-step nail art.
The technique used I've shown before (you can find it here)
But today I wanted to see if it could also bring some other ways of use.

Step 1: Start with a white base

OPI - Alpine Snow

 

Step 2: Preparations for the nail art

1) Material:

 

- Seche Vite topcoat (or any other topcoat)

- Sealable plastic bag/zipper bag

 

2) Make some sort of swatches with the topcoat on the bag and let it dry:

 

3) Give the topcoat swatches different blue colors and let it dry:

Step 3: Making the nail art

1) Material:

 

- Scissors

- Tweezers

2) Carefully pull the topcoat with color from the bag. Hold it with the tweezers as you cut it in any desired design. I chose to cut some stripes, triangles, triangular shapes and random little shapes:

 

3) Apply topcoat on the white base and use this as glue for your shapes. To easily remove any excess apply another layer of topcoat as the shapes will blend in it. (The rest can be removed with remover.)

And this is the outcome:

The first three designs (from left to right) aren't that special I think.
This can also be done hand painted and for me it would take less time.
But if you aren't that steady yet, this could be the perfect solution.
The last design I really love. I can't even describe it but Í'll give it a try: broken glass, crushed ice, stars...It is different!



Day 173) Colored stamping

Not new, nor mine.
But sometimes you see things that you just have to try for yourself and share if it works.
Before I discovered Konad stamping I really hated stamping.
I only had low-budget stamping stuff and it was already difficult to get the design good on the stamp. What a frustration!
With Konad I discovered it was easy and fun and there are beautiful designs which are almost impossible to do by hand (especially the ones that fully cover the nail).
I still have trouble stamping bigger designs (my nails are quite round) and also using my left hand is sometimes a real challenge.
Today's nail art comes in really handy for those disadvantages.

So, let's get to it!

Step 1: Preparation

Material:
-Tape
-Paper on which you draw some rectangles (bigger than nail size)
-Zipper bag
-Scissors

Take the scissors and cut your zipper bag.
End up with two rectangular pieces of plastic.

Place a piece of plastic on top of your paper.
Hold it with tape and make sure the plastic is pulled.







Step 2: Topcoat

Topcoat used: Seche Vite


Apply topcoat (fill in the rectangular shapes).

I found these rectangular shapes very handy because it is hard to see where you've put the topcoat.

Let it dry for a bit.




Step 3: Stamping

Used material:
-Mash stamping polish (black)
-Konad stamping polish (white)
-Konad scraper
-Essence stamp
-Image plates:
 *Mash-08
 *Mash-10
 *Konad (promotion)

Choose your desired design and make sure you got it right on the stamp.

Stamp on your topcoated rectangular shape.

Repeat for the other topcoated rectangular shapes.








Step 4: Coloring

Use a nail art brush and different colors of nail polish to color your designs.








Step 5: Application

Carefully remove the topcoat with your design from the plastic.

Apply a base-/topcoat or any desired nail polish onto your nails.
Use this as glue for your topcoated designs.
Place your topcoated design on your nail and gently push and smooth it on the surface.
Apply another coat of topcoat and remove excess. You can also use a cotton tip with some remover.







And here is my final look (done with my lefty):

Day 29) DIY nail foil

                 Zipperbag

                                                      Nail polish on zipperbag

                                                   Make design

Remove from zipperbag after drying

       Put on basecoat and apply

Clean up with remover